Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.     

Biodegradation of anthracene and different PAHs by a yellow laccase from Leucoagaricus gongylophorus

Environmental Science and Pollution Research - Laccases produced by Leucoagaricus gongylophorus act in lignocellulose degradation and detoxification processes. Therefore, the use of L....     

Determinants of household fuel choices among Nigerian family heads: are there gender-differentiated impacts?

The consensus in the literature holds that female-headed households (FHHs) are more vulnerable to social and economic exclusion than male-headed households (MHHs). This paper investigates the socioeconomic determinants of household cooking fuel choices across MHHs and FHHs, using the rich Nigerian Demographic Health Survey data. Using the exogenous switching treatment effect regression (ESTER) technique, the study is able to unravel differences in socioeconomic effects of gender inequality on cooking fuel choices in Nigeria. The results validate the energy ladder hypothesis in the Nigerian case and show that the choices of dirty fuel (biomass) is more prevalent among the de-jure FHH when compared with the de-facto FHH and MHHs. Also, the probability of biomass-use among MHHs would have fallen by 1.3% if MHHs had similar socioeconomic attributes as the FHHs. In the same vain for FHHs, the probability of kerosene-use would have increased by 2%. The study observed no gender gap in kerosene-use. Thus, the established gender gap in biomass- and kerosene-use would have reduced to 6.7% and 2.8%, respectively, if the de-facto FHHs had same socioeconomic attributes as the de-jures. Considering the traditional gendered household division of labor within the households, de-jure FHHs’ energy choices may be due to limited economic opportunities that guarantees cleaner energy options.

     

Vitellogenesis in the deep-sea shark Centroscymnus coelolepis

At present, information on the reproductive physiology of Centroscymnus coelolepis, which is one of most important and widespread deep-sea shark species, is completely lacking. In this study, we investigated vitellogenesis, a key step in the reproduction biology of fishes. Specimens of C. coelolepis were collected at 2850 m depth in the Western Mediterranean Sea. The size of the collected sharks (range: 35.5-65.0 cm TL) was much lower than those typically reported for the Atlantic and Pacific Oceans. The marked distinctiveness of Mediterranean and Atlantic/Pacific populations was reflected by the achievement of sexual maturity at a smaller size in Mediterranean specimens. The examination of cytoplasmatic components of oocytes indicated that vitellogenin uptake in the ovary started when oocytes reached 14 mm in diameter. Only reproductive females displayed a significant relationship between plasmatic vitellogenin and gonadal development, suggesting that vitellogenesis in C. coelolepis is a discontinuous process. Oestradiol levels were tightly coupled with gonadal development, underlining the importance of this hormone in controlling vitellogenesis. All these findings suggest that vitellogenesis in this yolk-sac viviparous shark might occur with similar mechanisms of oviparous vertebrates.     

Sorption of biodegradation end products of nonylphenol polyethoxylates onto activated sludge

IntroductionRecently ,nonylphenolpolyethoxylates (NPnEO (n :numberofethoxyunits(EOs) )havebecomeaproblematicissueforthereasonthatthesecompounds,animportantgroupofnonionicsurfactants ,havebeenusedwidelyinvariousindustriesasflocculants,dispersants,emulsifie…     

Comparative evaluation of processes for heavy metal removal from municipal solid waste incineration fly ash

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｈａｓｂｅｅｎｒｅｐｏｒｔｅｄｔｈａｔｍｕｎｉｃｉｐａｌｓｏｌｉｄｗａｓｔｅｉｎｃｉｎｅｒａｔｉｏｎｆｌｙａｓｈ（ＭＳＷＦＡ）ｃｏｎｔａｉｎｓｃｏｎｓｉｄｅｒａｂｌｅａｍｏｕｎｔｓｏｆｈｅａｖｙｍｅｔａｌｓ（Ｂｅｒｇ，１...     

Recognizing local people's priorities for tropical forest biodiversity

Tropical forest people often suffer from the same processes that threaten biodiversity. An improved knowledge of what is important to local people could improve decision making. This article examines the usefulness of explicitly asking what is important to local people. Our examples draw on biodiversity surveys in East Kalimantan (Indonesian Borneo). With local communities we characterized locally valued habitats, species, and sites, and their significance. This process clarified various priorities and threats, suggested refinements and limits to management options, and indicated issues requiring specific actions, further investigation, or both. It also shows how biological evaluations are more efficient with local guidance, and reveals potential for collaborations between local communities and those concerned with conservation. Such evaluations are a first step in facilitating the incorporation of local concerns into higher-level decision making. Conservationists who engage with local views can benefit from an expanded constituency, and from new opportunities for pursuing effective conservation.     

The degradability of biodegradable plastics in aerobic and anaerobic waste landfill model reactors

Degradabilities of four kinds of commercial biodegradable plastics (BPs), polyhydroxybutyrate and hydroxyvalerate (PHBV) plastic, polycaprolactone plastic (PCL), blend of starch and polyvinyl alcohol (SPVA) plastic and cellulose acetate (CA) plastic were investigated in waste landfill model reactors that were operated as anaerobically and aerobically. The application of forced aeration to the landfill reactor for supplying aerobic condition could potentially stimulate polymer-degrading microorganisms. However, the individual degradation behavior of BPs under the aerobic condition was completely different. PCL, a chemically synthesized BP, showed film breakage under the both conditions, which may have contributed to a reduction in the waste volume regardless of aerobic or anaerobic conditions. Effective degradation of PHBV plastic was observed in the aerobic condition, though insufficient degradation was observed in the anaerobic condition. But the aeration did not contribute much to accelerate the volume reduction of SPVA plastic and CA plastic. It could be said that the recalcitrant portions of the plastics such as polyvinyl alcohol in SPVA plastic and the highly substituted CA in CA plastic prevented the BP from degradation. These results indicated existence of the great variations in the degradability of BPs in aerobic and anaerobic waste landfills, and suggest that suitable technologies for managing the waste landfill must be combined with utilization of BPs in order to enhance the reduction of waste volume in landfill sites.     

Bioleaching of metal from municipal waste incineration fly ash using a mixed culture of sulfur-oxidizing and iron-oxidizing bacteria

We investigated the behavior and characteristics of metal leaching from municipal solid waste incineration (MSWI) fly ash among pure cultures of a sulfur-oxidizing bacterium (SOB) and an iron-oxidizing bacterium (IOB) and a mixed culture. The IOB has a high metal-leaching ability, though its tolerability against the ash addition is low. The SOB might better tolerate an increase in ash addition than the IOB, though metal leaching ability of the SOB is limited. Mixed culture could compensate for these deficiencies, and high metal leachability was exhibited in the 1% ash culture, i.e., 67% and 78% of leachabilities for Cu and Zn, respectively, and 100% for Cr and Cd. Furthermore, comparably high leachabilities such as 42% and 78% for Cu and Zn were observed even in the 3% ash cultures. Characterization of metal leaching by the mixed culture revealed that the acidic and oxidizing condition had remained stable thorough the experimental period. Ferric iron remained in the mixed culture, and the metal leaching was enhanced by redox mechanisms coupling with the leaching by sulfate. An increase of ferrous iron enhanced the Cr, Cu, and As leaching. The optimum concentration of sulfur existed for As and Cr (5 gl(-1)) and Cu (2 gl(-1)). The presence of the degradable and non-degradable organic compound that must be existed in the natural environment or waste landfills made no significant change in the leachability of metals other than Zn. These results suggested that bioleaching using a mixed culture of SOB and IOB is a promising technology for recovering the valuable metals from MSWI fly ash.     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001